Free shipping on all US order or order above $200
A full featured NVR capable of recording up to 32 channels at 5MP resolution.
Milesight cameras connected to the POE ports are auto configured and assigned their own separate subnet. You only need to set the IP address and gateway on the NVR to be up and running within minutes.
Android, IOS, Windows and MAC OS software for remote viewing is free of charge. P2P technology means no configuration changes are required to the customers router or firewall for it to work. Static IP or Dynamic IP are both supported out of the box.
This NVR has the following features:-
Order a Hard Drive and we will install it for you.
Milesight 4K NVR is a patent design 32CH NVR which can work with all ONVIF-compliant IP cameras, supporting dual stream, and up to 4K definition (3840*2160, effectively four times that of Full HD ) live viewing, playback and recording. It also features embedded Linux OS for stability and a user friendly GUI for intuitive usage.
H.265 is the next-generation video compression format that is twice as efficient as H.264. Compared to H.264, H.265 has the following benefits: 50% reduction in bandwidth for images at the same resolution. 50% reduction in storage for images at the same resolution. 50% reduction in bitrate for the same visual quality. Future proof for 4K UHD and 8K UHD.
Hardware Components are optomized to meet the demands for convenient and stable hard disk installation. Up to 4 hard drives can be quickly and easily installed.
RAID is a method of combining multiple hard drives as a single unit to achieve redundancy and greater read/write speeds. Milesight 7000 series NVRs support RAID levels 0, 1, 5, 10. They are user configurable according to the user's exact project requirement for data protection and storage space.
The Milesight 7000 Pro NVR series can synchronously decode 4-ch 4K UHD, 8-ch 4MP and 16-ch 1080P and synchronously record up to 32-ch 4MP.
The 4K Pro NVR 7000 series has HDMI, VGA, 3 USB Ports (1 rear, 2 front), Alarm I/O, Audio I/O and two LAN ports provding all the required interfaces for effective video survellience.
|Network Video Input||32 Channels|
|Maximum Bandwidth||256Mbps or 200Mbps (when RAID is enabled)|
|HDMI Output||1-ch, Resolution: 3840x2160/30Hz, 1920x1080/60Hz, 1920x1080/50Hz, 1280x720/60Hz. HDMI supports Audio Output|
|Video Dual Stream||Yes|
|Synchronous Playback||4*(30fps @8MP), 6*(8fps @5MP), 8*(20fps @4MP), 10*(20fps @3MP), 16*(30fps @1080P), 32*(30fps @720P)|
|Video Compression||H.265(HEVC) / H.264|
|Audio Compression||G.711 U-Law|
|Maximum Hard Drives||4 x SATA HDD (3.5”)|
|Maximum Hard Drive Capacity||Up to 10TB capacity for each HDD. WD Purple NVR Drives recommended|
|Recording||Manual recording, timing recording, motion detection recording, alarm recording, motion detection or alarm recording, motion detection and alarm recording|
|Playback||Video playback, Image playback|
|Backup||Video backup, Image backup|
|Network Protocols||IPv4, HTTP, NTP, SMTP, PPPoE, DDNS|
|Network Interface||2 RJ45 100M/1000M / 24 Port POE Switch|
|USB Interface||1*USB 3.0; 2*USB 2.0|
|Power Consumption||<200W maximum (excluding hard drives)|
|Working Conditions||Temperature:-10℃~+55℃ Humidity:10%~90%|